E+E EE660-T3A7L300K2 | Air velocity transmitter fission -Cảm biến tốc độ không khí 24VDC 0-10V/ 4-20mA 0-2mps +/-2% +0.06mps

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm E+E ELEKTRONIK (EPLUS)

• 

  Các model Đồng hồ hiển thị cảm biến lưu lượng Siemens MAG 5000/6000 Flow transmitters

• 

  Flow sensors FTMg, Đồng hồ đo lưu lượng tiêu thụ năng lượng của Sick có phát hiện rò rỉ

• Xem thêm

Cảm biến tốc độ không khí E+E EE660-T3A7L300K2 | Air velocity transmitter fission

(24VDC 0-10V/ 4-20mA 0-2mps +/-2% +0.06mps)

Low Air Velocity Sensor
EE660

190 v1.4 / Modification rights reserved The EE660 is optimized for highly accurate measurement of very low air
velocity in laminar flow control and special ventilation applications, for instance in clean rooms.

Excellent Measurement Performance

The E+E thin film sensing element employed in EE660 operates on the hot film anemometer principle, which stands for excellent accuracy down to 0.15 m/s (30 ft/min), high insensitivity to pollution and low angular dependency.

Analogue and Digital Outputs
The air velocity measured data is available as current and voltage outputs, on the RS485 interface with Modbus RTU or BACnet protocol, as well as on the optional display.

Easy Configuration and Adjustment
The EE660 is user configurable with jumpers on the electronics board or via software. An optional configuration adapter and the free EE-PCS Product Configuration Software facilitate the adjustment of EE660 and the display setup.



Features



 

Technical Data

Measurand
Working range 1)
0...1 m/s (0...200 ft/min)
0...1.5 m/s (0...300 ft/min)
0...2 m/s (0...400 ft/min)

Accuracyat 20 °C 2) (68 °F), 45 % RH, 1013 hPa
0.15...1 m/s (30...200 ft/min) ± (0.04 m/s (7.9 ft/min) + 2 % of mv)
0.15...1.5 m/s (30...300 ft/min) ± (0.05 m/s (9.8 ft/min) + 2 % of mv)
0.15...2 m/s (30...400 ft/min) ± (0.06 m/s (11.8 ft/min) + 2 % of mv)

Response time τ90 3)
typ. 4 sec or typ. 1 sec (at constant temperature)

Output
Analogue 0 - 10 V and 4 - 20 mA
0...1 m/s / 0...1.5 m/s / 0...2 m/s 1)
-1 mA < IL < 1 mA RL< 450 Ω (linear, 3-wires)

Digital interface
Protocol
RS485 with max. 32 devices on one bus
Modbus RTU or BACnet MS/TP


General
Power supply (Class III)
24 V AC/DC ± 20 %

Current consumption (max.)		AC supply - no display	DC supply - no display	AC supply - with display	DC supply - with display
	Analogue ouput	74 mA rms	41 mA	180 mA rms	85 mA
	Digital ouput	120 mA rms	50 mA	-	-

Angular dependence
< 3% of the measured value at | Δα | < 10°

Electrical connection
screw terminals max. 1.5 mm2 (AWG 16)
Cable gland M16x1.5

Electromagnetic compatibility
EN61326-1 EN61326-2-3
Industrial Environment

Housing material
Polycarbonate, UL94V-0 (with Display UL94HB) approved

Protection class
Enclosure IP65 / NEMA4, remote probe IP20

Temperature range
working temperature probe -25 ... +50 °C (-13...122 °F)
working temperature electronic -10 ... +50 °C (14...122 °F)
storage temperature -30 ... +60 °C (-22...140 °F)


Working range humidity
5...95 % RH (non-condensing)

1) Selectable by jumper, only for analogue output
2) The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation).
The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement).
3) Selectable by jumper (analogue) and slide switch (digital)

 

Dimensions mm (inch)

 

Ordering Guide

			EE660-
Configuration	Model	Duct mount Remote probe	T2 -	- T3
	Output	0-10 V and 4-20 mA RS485	A7 J3
	Probe length	100 mm (3.94") 200 mm (7.88") 300 mm (11.82")	L100 L200 -	- - L300
	Cable lngth	1 m (3.3 ft) 2 m (6.6 ft) 5 m (16.4 ft) 10 m (32.8 ft)		K1 K2 K5 K10
	Display	no display with display (only for analogue ouput A7)	no code D2
Setup RS485	Display unit	m/s ft/min	no code DA21
	Protocol	Modbus TTU 1) BACnet MS/TP 2)	P1 P3
	Baud rate	9600 19200 38400 57600 3) 76800 3)	BD5 BD6 BD7 BD8 BD9

1) Factory setting: Even Parity, Stopbits 1 Modbus Map see User Guide at www.epluse.com/ee660
2) Factory setting: No Parity, Stopbits 1 Product Implementation Conformance Statement (PICS) available at www.epluse.com/ee660
3) Only for BACnet MS/TP

 

Order Examples

EE660-T3J3L300K1P1BD5

Model: remote probe
Output: RS485
Probe length: 300 mm (11.82“)
Cable length: 1 m (3.3 ft)
Display: no display
Protocol: Modbus RTU
Baud rate: 9600
 

EE660-T2A7L200

Model: duct mount
Output: 0-10 V and 4-20 mA
Probe length: 200 mm (7.88“)

 

Accessories

USB configuration adapter       HA011066
Product configuration software EE-PCS (free download: www.epluse.com/EE660)
Power supply adapter               V03 (see data sheet Accessories)